Window repairs can help homeowners save money while maintaining their comfort. Window replacement may be necessary in the event of severe damage, such as broken glass or a window frame that has been smashed.
However, many other issues can be repaired to extend the life of your windows. Some common issues include:
Cracked or broken panes
It’s a rock that’s been that was tossed by your lawnmowers or a tree branch blown by high winds, cracked window glass isn’t just ugly, but it can also result in more expensive electricity bills because the broken pieces let cold air to enter your home. Fortunately, it’s generally easy to fix windows with broken panes.
Begin by carefully removing the glass using gloves and glasses. You may need to use an utility knife to remove old glazing compound or putty around the frame’s edges. Next, wipe down the glass’s surface and the wood of the frame with a soft cloth or paper towel.
After cleaning the area, apply silicone caulking that is waterproof to the frame’s edges. This will prevent water from getting into the frame through the cracks and result in further damage.
If you have double-pane glass, cracks that are severe could damage the gas layer between the panes and make your windows less insulative. If the crack is significant enough to cause damage to the integrity of the glass or in the case of an inner pane completely missing, it’s time to contact an expert.
Cracks caused by thermal stress can occur when there’s a drastic difference in temperature both inside and outside your home. This causes the glass to expand and shrink. If the cracks are located on two sides of a window, it is recommended to replace it rather than try to repair Window it.
Clear tape can be used to seal cracks in windows that aren’t yet ready to be replaced. It will also keep out bugs and cold wind. You can cut an amount of nylon stocking big enough to completely cover the crack and glue it with duct tape. This isn’t a long-term solution however it can be useful in the event of a crisis and keeps insects and cold air away from your home. If you notice cracks or blemishes on your older windows, you should check with the local company to determine if replacing the whole window is the best option.
Wood rot is one of the most frequent issues with windows. It can alter the appearance of a home and can also be an hazard to safety. However, it is possible to repair rotted wood. First, you will need to make sure that the root of the rot has been addressed. Examine for leaks in the roof and other areas where water can enter the wood.
You’ll then have to take off the rotten parts of the window frame. This can be done with either a chisel, a rasp or claw hammer. After the rotten areas have been eliminated it is time to replace them with new wood. It is recommended that you choose treated wood for this project as it is more resistant to decay. If you are not able to replace the rotted timber you can apply wood hardener and filler to strengthen the damaged area. The majority of hardware stores carry this type of product. To achieve the best results, follow the instructions on the product label.
After you have replaced the decayed areas of the windowsill, it is crucial to safeguard the newly repaired area. Apply a water-resistant sealant the wood. Sikkens, for example, is a great product to apply.
You can also apply a two-part epoxy filler to protect the wood from further damage. It is simple to apply and provides a good finish. It is important to follow the directions on the label. After the epoxy filler is dry, you can sand the wood’s surface. Start with a rough sandpaper then move on to a smoother grade.
You don’t want to expose your rotted part to more moisture. It is therefore a good idea to cover the repaired area with an oil-based primer that will shield it from moisture. After that, you are able to reapply the waterproof wood sealant.
The Won’t open
There are a variety of reasons windows don’t open. Wood frames can warp when exposed to humid weather, the house might have sunk or someone may have nailed it shut for security reasons. But with some patience and the right tools, repair window many windows that are locked can be opened.
One of the most frequent causes of a window that isn’t able to open is the accumulation of gunk or debris on its moving parts. Acme Glass notes that dirt and grime accumulates over time on hinges, sliding tracks and locks. Metal hardware can also rust if it comes in contact with humidity and direct sunlight. Spraying grease on these areas to help prevent oxidation, and ensure that your windows are operating correctly.
The pulleys used to raise or lower the window may become loose, or break. These components can lose their tension and cause obstruction particularly if the window is located two or more stories higher than the ground.
If you’re having difficulty opening the repairing window, try using a pry bar to gently push the window to open a bit at a time. Place a block on the frame of the window to give the pry bar more leverage. Be careful not to harm the wood or the window. Try applying a hairdryer along the frame’s edges for a few minutes. This will warm the wood, making it easier to move.
Another common issue with windows that won’t open is a defective spring that stops the window jamb from lowering or rising. Depending on who manufactured the windows, you’ll be required to refer to the manual of your owner for additional instructions.
If you’ve tried cleaning and lubricating the moving parts on your windows, but they cannot open, it may be time to replace windows. Homespire Windows & Doors offers windows that are energy efficient. Don’t let the windows in your home go from functional to inoperable. If your windows aren’t properly shut could leave your home vulnerable for burglary and water damages. Contact us today to learn more about our replacement windows and services!